AVer VC550 Mode D'emploi page 12

Making a Video Call
A computer is required to use this device.
1. Open your video collaboration application such as Zoom, Microsoft
Skype, Google Meet, Intel
®
Meeting , TrueConf, Adobe Connect, Cisco WebEx
Vidyo, vMix, WebRTC, Wirecast, XSplit.
2. Set the CAM550 as your primary camera, and the FONE540 as your primary microphone and
speaker device in your application.
3. Ready to make a video call.
[Note] VC550 is a Plug-n-Play Conference System. The system requires no special drivers. For
advanced setting and firmware update, please download PTZApp 2.
Making a Connection through the Browser
VC550 camera has an Ethernet port for IP streaming and allows administrators to remotely control and
set up the camera via an internet access. Moreover, VC550 camera also supports RTSP and RTMP
functions. For more details, please refer to user's manual or contact our technical support.
1. Make sure the VC550 has an internet access connection.
2. Launch PTZApp 2* (
3. The camera default IP address is 192.168.1.168. Click pencil icon (
Unite™, RingCentral, BlueJeans, V-Cube, LiveOn, CyberLink U
®
(Please consult your application setup guide for details).
) and connect CAM550 to PC with USB cable
English-10
®
Teams, Skype for Business,
, Fuze, GoToMeeting™, Microsoft
®
.
) to edit IP address**.
Lync™,
®