Télécharger Imprimer la page

Garland SET 802 G Manuel D'instructions page 36

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
English
5. START UP INSTRUCTIONS
6.1. LIST OF MATERIALS
The machine includes the following elements that you
will find in the box:
• Machine.
• Protector.
• Tools.
• Instruction manual.
Remove carefully all the elements from the box and
make sure that all listed parts are included.
Check all the elements of the machine to ensure
that there are no damaged elements. If you find any
damaged part or there are any elements missing,
do not use the machine until the problem has been
solved or you have been given the missing parts.
Usage of the machine with defective or missing parts
is dangerous and could result in personal injuries.
6.2. MOUNTING
This machine comes mounted and ready for use.
6.3. FUEL
IMPORTANT: The petrol used in the machine
is highly flammable. Should the petrol catch
fire, use a dry powder fire extinguisher on the flames.
IMPORTANT! This engine works with
a mixture of 95 degree octane petrol
2,5% (40:1)
and two stroke synthetic oil in a 40:1
(2.5%) ratio.
Do not smoke while preparing or refuelling.
Do not approach any flame or hot element
to the fuel.
Mix gasoline and oil in a bottle homologated for this
use.
Always avoid the contact of petrol and oil especially
with your eyes. Should your eyes come into contact
with either the petrol or the oil, clean them with water.
Should you still have your eyes red with irritation,
consult immediately with your doctor.
Do not use petrol that has been stored for over two
months. Petrol that has been stored for too long will
make the start up of the machine more complicated
and will cause the engine to underperform. If the
petrol has been in the machines petrol deposit for a
period exceeding two months, remove and substitute
the petrol before using the machine.
FILLING THE FUEL TANK
1. Choose an adequate area to refill the deposit.
2. Shake the recipient so that the petrol and oil mix
correctly.
3. Remove the petrol cap and refill with the mixture.
4. Close the petrol deposit and wipe off any excess
mixture that might have spilt with a dry cloth.
WARNINGS:
Stop the engine before refilling.
Do not start the machine in a closed area. The exhaust
fumes, the vapours of the petrol and the chain oil,
all contain carbon monoxide and other dangerous
chemical substances. In case of gas concentration
due to insufficient ventilation, eliminate from the
work area everything that impedes the correct flow of
air and do not work in this area again until it is well
ventilated and the gas concentration does not happen
again.
Do not refill fuel in areas where flames, sparks or hot
sources are. Refill only in ventilated areas with engine
off. Do not overfill the fuel to try to overfill the fuel
36/144

Publicité

loading