Sylvania SP288 Mode D'emploi page 8

USB OR SD CARD PLAYBACK
You can connect a USB flash drive (not included) to the USB port or a SD card
(not included) to the memory expansion card slot on the unit to play MP3 files.
1. Press button to turn on the unit. Press the
the USB Indicator or SD indicator turns green.
will play the music files automatically.
2. Press to suspend momentarily the playing track. Press
playing.
3. Press button to skip forward to next track and
previous track. Press and hold
4. Using numeric buttons to your desired track. eg: pressing "1", means track 1.
pressing "2"+"0"+"9 means track 209.
Note:
• Supporting format: MP3 (32kbps-320kbps)
• The total number of MP3 files on the Memory Device should not exceed 999.
• If you can not easily insert the memory card, you may have inserted it incorrectly.
Try to turn over the card and then insert again.
• For playing files on USB flash drive or SD card, you should plug in the
drive or SD card when the unit is in standby mode. Turn ON the unit and use MODE
button to select USB or SD card mode.
• There are many USB devices in the market. We cannot guarantee to support all
different models. Please try another USB device if your device is not supported.
• Some SD cards may be incompatible.
BLUETOOTH PAIRING & LINKING OPERATION
1. Turn off the Bluetooth functionality of other devices that were paired with your unit.
2. Press button to turn on the unit.
3. Press MODE button to select Bluetooth mode. The Bluetooth indicator will
turn green.
4. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth
controls are found on the device's tools or settings menu (see your user manual).
Turn on Bluetooth connectivity and make your device "discoverable".
5. Clean out the paring list on your Bluetooth device.
6. Choose "add a new Bluetooth device" or "setup Bluetooth device" on your device.
It will start to search. Once
device prompts you for a pass code, please enter 0000. If the pairing attempt fails
or times out, please start pairing procedure again (see steps 2-6).
7. After your device and the "SP288" have connected each other, a
can be heard.
Play MUSIC from Bluetooth devices.
Make sure the Bluetooth connection between the unit and the device is active.
1. Press to suspend momentarily the playing track. Press
playing.
2.Press button to skip forward to next track and
previous track.
MODE
Wait for a few seconds, the unit
or to search quickly within a track.
shows on your device, select it. If your
"SP288"
7
Button repeatedly until
again to resume
to skip backward to
USB flash
sound
again to resume
to skip backward to