Home Decorators Collection WSHC30EVDWDG Instructions D'assemblage page 6

Assembly (continued)
5
Change handles and knobs
□ This vanity has two type of handle hardware (Brushed Nickel or matt black) provided for choice.
□ Please remove bolt on handle, then change to other finish, if needed.
6
Vanity Drawer Removal
Removing the Drawer:
□
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up on the left track to release the drawer. Pull the drawer out the rest of the way.
Replacing the Drawer:
□
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time after it has been removed.
3. Push the drawer in completely.
B
6
AA