INOVU MBQ27 Guide D'utilisation page 39

STAND INSTALLATION
5. Take out the monitor keeping the protective foam under, gently place it on a table or
on a flat surface.
6. Insert the stand's mounting plate at the rear of monitor. There will be a ''click'' sound
once the mounting plate is properly locked. Ensure that the stand is properly attached
on the back of the monitor before handling it. If you want to remove the stand, push
the quick locking / unlocking button located at the back of the mounting plate.
2. Insert the upper part
first, and press
down
Note: The stand can easily be detached from the monitor by pushing the fast
locking / unlocking button located on the back cover. Make sure that the
monitor is lying on a flat surface before removing it.
Fast locking / unlocking button
2. A ''click'' sound confirms that the column
stand's mounting plate is properly locked to the
back of monitor.