Télécharger Imprimer la page

Sylvania iMode SIP425 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

4. Operation instruction
First, when the device is powered for the first time, it is at standby state. Press " " on
the panel to start it to enter working state.
flashes once as long as the device receives the key action signal no matter this
icon
device is at working or standby mode
If the device is at standby mode, the screen becomes bright when it receives the action
signal and becomes dark without action within 2 seconds. If it is at working state, the screen
becomes bright when receiving action signal and becomes dark without action signal within
30 seconds.
4.1 IPOD/IPHONE mode
After entering working state by pressing
lightened. Or when the device is at other modes during working status, switch it to
IPOD/IPHONE mode by pressing MODE on panel.
At IPOD/IPHONE mode, make operation for previous song and next song in
IPOD/IPHONE by using
and
on panel. Use
IPOD/IPHONE.
4.2 FM radio mode
When the device enters working state, switch it to FM mode by pressing MODE key on
panel. The
icon on display screen will be lightened.
key (ATS function)on panel to search radio station in
At FM mode,long press on
full band of FM. The searched station will be saved automatically and 30 stations can be
saved at most. Press
on panel to select saved station after completion of search,and
short press on
(TUNING- function) or
adjustment for station frequency to decrease or increase 0.05MHz so as to reach the user's
requirement.
4.2.1 INFO function
At FM mode, long press
(INFO function) on panel to preview the saved station
after completion of search and press INFO again to stop preview when listenning to the
favorite station.
4.3 AUX mode
At working state, switch this device to AUX IN mode by pressing MODE key on panel.
Use
key to control mute of external input at this mode.
Note: the volume for above three modes is separated. The default value is 13 when
entering this mode for the first time.
At these three modes, EQ can be used to change the music effect that users need when
music is played.
, the
icon on display screen will be
button to control play/pause of
(TUNING+ function)on panel conduct fine
5

Publicité

loading