Page 1
Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 3/32" (2.38 mm) For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning. ・To READ ALL warnings, care and maintenance information.
Page 2
Faucet Installation Position faucet (1) with single or three hole escutcheon (2) and gasket (3) on mounting CONNECT TO WATER SUPPLIES. surface. Option: If mounting surface is uneven, use silicone sealant under the gasket (3). Place mounting hardware (4) over mounting stud (5) under sink. Secure with mounting nut (6).
Page 3
Install Pop-Up Assembly Remove stopper (1) and flange (2). Screw nut (3) all the way down. Apply silicone to underside of flange (1). Insert body (2) into Push black gasket (4) down. sink. Screw flange onto body. Pivot hole (3) must face back of sink.
Page 4
Maintenance FLUSH SYSTEM / CHECK FOR LEAKS Turn faucet handle (1) all the way on. Slowly turn on hot and cold water SHUT OFF WATER SUPPLIES supplies (2) and flush water lines for one minute. If faucet leaks from under handle: Remove handle and ensure bonnet (1) is tight.
Page 5
Specify Finish Especifíque el acabado Précisez la Finition RP48193▲ Lift Rod Assembly Barra de Alzar Tige de Manoeuvre RP76702▲ RP75610 Escutcheon & Base plate Gasket, Rings & O-rings Chapetón y Placa de base Empaque, Anillo y Anillos “O” Boîtier et Plaque de finition Joint, Anneau et Joints Toriques RP76563 RP76563-1.2...
Page 6
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.