Manhattan 130202 Mode D'emploi page 2

SATA Quick Dock • Quick Install Guide
Thank you for purchasing the MANHATTAN
This guide presents the basic steps to install this device. For detailed operating
instructions and specifications, refer to the user manual available at
www.manhattan-products.com.
Installation
1. Using the included USB
cable, connect the SATA
Quick Dock to a USB port
on the computer or hub.
2. Using the included power
adapter, connect the SATA
Quick Dock to an AC power
outlet.
3. Press the Power button to
turn on the Dock. It will
automatically find and
install the necessary
driver(s). The LED should
light to indicate power.
4. Insert a hard-disk drive (2.5" or 3.5") firmly into the Dock.
Operation
The software on the included CD needs to be installed to proceed with the
operating procedure(s). Insert the CD and follow the on-screen instructions. For
details, refer to the user manual available at www.manhattan-products.com.
• Drives can be inserted or removed from the SATA Quick Dock while it is
powered on, but take extra precautions against electrical discharges.
• Do not handle a drive by its sensitive components or place near speakers,
televisions or other magnetic devices.
NOTE: MANHATTAN accepts no responsibility for lost data.
Package Contents
• SATA Quick Dock
• Power adapter, USB cable, software CD, quick install guide
2
English
130202_01_QIG_ML.indd 2
SATA Quick Dock, Model 130202.
®
Power jack
One-touch
backup
button
English
USB port
Power
button
LED
6/9/10 8:04:38 AM