Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION (ACCESSORIES NO INCLUDED):
1. FLANGE
•
Manufacture the mould with the iron cable or bar according to its
design.
• Use the flanges to secure the FLEXILIGHT inside the cable.
• It is perfect for Artwork and lighting of buildings.
2. STEEL MESH
• Firstly make the design in its current size on paper.
• Place the steel mesh over the design, fix the FLEXILIGHT on the mesh with
flanges according to its drawing.
• It is perfect for Artwork.
3. FIXING CLIP
•
Set the fixing clip with ropes in wooden surfaces, with glue or double-
face adhesive tape, according to its design.
1
3
5
•
To make square or rectangular figures, use the appropriate fixing clip
and set it with ropes.
• You can use it on wood surfaces, metal, etc It is perfect for great lighting
proyects.
4. CABLE CONDUIT
• Set the cable conduit on a glass surface with the double-face cap or tie
it on wood surfaces.
• Push the FLEXILIGHT in the conduit.
• It is perfect for right-line decoration.
5. SUCTION PADS
• Fix the suction pads on the glass surface or metal with glue.
• Use the flanges to fix the FLEXILIGHT to the suction pad.
• It is suitable to glass or metal surfaces.
2
4
Publicité
