Bosch 0.611.332.104 Notice Originale page 20

OBJ_BUCH-337-002.book Page 19 Monday, March 2, 2009 4:19 PM
Technical Data
Rotary Hammer
Article number
Rated power input W
Rated speed min
Impact rate min
Impact energy per
stroke
Chisel positions
Tool holder
Lubrication
Max. drilling dia.
– Concrete
(with twist drill) mm
– Brickwork
(with core bit) mm
– Steel mm
– Wood mm
Weight according
to EPTA-Procedure
01/2003 kg
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Bosch Power Tools
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibrational emis-
GBH 4-32 DFR
sion value a
Professional
Chiselling: Vibrational emission value
3 611 C32 0..
a
Drilling in metal: Vibrational emission value
3 611 C32 1..
a
900
Screwdriving without impact: Vibrational emis-
-1
0–760
sion value a
-1
The vibration emission level given in this infor-
0–3600
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
J 5.0
may be used to compare one tool with another.
12
It may be used for a preliminary assessment of
exposure.
SDS-plus
The declared vibration emission level repre-
Central permanent
sents the main applications of the tool. However
lubrication
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
32
cantly increase the exposure level over the total
working period.
90
An estimation of the level of exposure to vibra-
13
tion should also take into account the times
32
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
4.7
Identify additional safety measures to protect
/II
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
2
=10 m/s , uncertainty K=1.5 m/s
h
2
=9 m/s , uncertainty K=1.5 m/s
h
2
<2.5 m/s , uncertainty K=1.5 m/s
h
2
<2.5 m/s , uncertainty K=1.5 m/s
h
1 619 929 774 | (2.3.09)
English | 19
2
,
2
,
2
,
2
.