TREVIDEA Girmi FE30 Mode D'emploi page 13

cooking (2) and place the grill or the rack inside oven at the right height.
- Always place the tray (9) under the grill (8) to avoid dripping on the lower heating element while cooking.
- The working light (1) will switch on, indicating that the unit is running.
- Periodically check the condition of the food during cooking. In case you need to open the door for any
reason, close it as quick as possible to avoid losing heat.
- At the end of cooking process, the light will turn off and the timer will beep. If the cooking is not complete
reset the timer control knob.
- Always remove the oven tray and grill using the handle (11). Turn the temperature control knob (5) to the
minimum position.
CLEANING
Unplug the unit from the electrical outlet and allow each part to cool down before starting any cleaning
procedure.
- Do not place the oven in water. In any case prevent splashes of water or other liquids from reaching the
unit.
- Regular cleaning of the internal chamber ensure better performances and prevents unpleasant odors. Use a
soft cloth and non-abrasive cleaner for the cooking compartment.
- Grill, tray, oven rack and other accessories can be washed as everyday crockery.
- Do not use abrasive or metallic sponges to clean the outside of the oven. This may jeopardize the paint.
- Be careful not to drop any liquid or soap in the ventilation openings during cleaning.
Crumbs, oils and cooking residues fall to the bottom of the unit. For faster cleaning, remove the crumb tray
and clean it separately.
TECHNICAL FEATURES
•
Power supply: AC 230V~50-60Hz. Power 1600W
•
Capacity: 30L
•
Convection, inner light, 60 minutes timer
•
3 cooking functions: low, grill, combined
•
Adjustable temperature from 100°C up to 230°C
PORTUGUÊS: ADVERTÊNCIAS
As indicações seguintes são muito importantes no que se
refere à instalação, uso e manutenção deste aparelho;
conserve com cuidado este manual para eventuais futuras
consultas; utilize o aparelho apenas do modo indicado
neste manual de instruções; outro tipo de utilização
deverá considerar-se inadequado e perigoso; por isso, o
fabricante não poderá ser considerado responsável na
eventualidade de ocorrerem danos resultantes de uso
indevido, errado ou irresponsável.
Antes de utilizar, certifique-se da integridade do aparelho;
em caso de dúvida não o utilize e dirija-se à assistência
técnica autorizada; não deixe partes da embalagem (sacos
de plástico, esferovite, pregos, agrafos, etc.) ao alcance
12