Sony BRAVIA XBR-85X950B Mode D'emploi page 11

1
Attach the Floor Stand to the TV.
2
Support the Floor Stand while attaching
them to the TV using the supplied
screws to avoid dropping.
3
Support the attached Table-Top Stand
while removing them from the TV to
avoid dropping.
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m
{15 kgf·cm}.
x Alternative
You can change the Table-Top Stand from
the middle to the edge position by referring
to the instructions below.
Edge position
(Continued)
US
11
US