Ktech AL101 Mode D'emploi

Ktech
INDUSTRIAL PRODUCTS INC.
AL101 Overfill Protection Device, Indoor Alarm
Part No.: AL101-8-8TK-FS Indoor Failsafe Alarm Panel
The Model AL101-8-8TK-FS is an Indoor failsafe alarm panel that accepts eight switch
contact inputs and provides an audible alarm signal when the external contacts are opened. It
must be mounted in a non-hazardous location. The white pilot light indicates the 120 VAC
power. The TEST push-button is a momentary button that turns on the eight red lights and
the horn. The red pilot lights provide the visual alarm indication for each alarm contact. The
MUTE push-button is a momentary button that mutes the horn for the eight alarm inputs. In
the event of a power failure the alarm will come back on with the power. The red light remains
on until the alarm condition is corrected. The alarm circuit resets automatically. Use Ktech
float switches for the alarm input contacts.
Electrical Specifications
120 VAC, 60 Hz, 200mA
Switch inputs at terminals 3&4, 5&6, 7&8, 9&10, 11&12, 13&14, 15&16, 17&18
Wire Gauge Range is 20-10AWG
Buzzer -- 95 dB @ 1 ft.
Certified to CSA C22.2 No.205 and Conforms to UL2017
CAUTION: REFER TO INSTRUCTIONS BEFORE OPERATING ALARMS
14 3/4"
371 mm
Ktech Industrial Products, 20 Regan Road, Unit 11, Brampton, Ontario. L7A 1C3
15 5/16"
388 mm
120VAC - Line
Neutral
TANK #1
TANK #1
TANK #2
TANK #2
TANK #3
TANK #3
TANK #4
TANK #4
TANK #5
TANK #5
TANK #6
TANK #6
TANK #7
TANK #7
TANK #8
TANK #8
Phone (905) 840-7106, Fax (905) 840-6172
LISTED
OVERFILL
PROTECTION
DEVICES
4YC9
CAN/ULC-S661-10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18