Cherubini Plug&Play Plus Instructions page 18

EXAMPLE 2:
SETTING AS FIRST THE LOWER LIMIT SWITCH
If the rolling shutter is completely down, you have first to drive it up by around
20 cm.
Using the button switch, put the rolling shutter to the lower desired position and to
memorise, perform the indicated sequence of commands; (DOWN-DOWN-DOWN).
?
UP
DOWN
Using the button switch, put the rolling shutter to the upper desired position and to
memorise, perform the indicated sequence of commands; (UP-UP-UP).
LIMIT SWITCH SETTING IN MIXED MODE
Where required for, the limit switch positions can be set in mixed mode.
EXAMPLE:
SETTING AS FIRST THE UPPER LIMIT SWITCH IN MANUAL MODE AND THE LOWER
LIMIT SWITCH IN AUTOMATIC MODE
If the rolling shutter is completely open, you have first to drive it down by around
20 cm.
Using the button switch, put the rolling shutter to the upper desired position and to
memorise, perform the indicated sequence of commands; (UP-UP-UP).
?
UP
DOWN
Using the down button drive the rolling shutter to the complete lower position twice,
allowing the motor to automatically detect the limit switch.
DOWN DOWN
UP
UP
18
DOWN
HOLD
UP UP
HOLD
UP UP
HOLD
2 sec
2 sec
2 sec