Télécharger Imprimer la page

Venmar Chef VCQSEN1 Serie Manuel D'installation, D'utilisation Et D'entretien page 14

Masquer les pouces Voir aussi pour Chef VCQSEN1 Serie:

Publicité

Les langues disponibles

Les langues disponibles

FRAMELESS CABINET
14
Refer to the marking on brackets to determine the correct installation side and orientation.
3 X
7/64"

Align the corresponding bracket to the cabinet side, while placing rear end of bracket
against the wall. Draw a line on the outer edge of the bracket (as shown).

Slide the bracket towards the center of cabinet and align side edge to marked line,
keeping the rear end edge leaning on the wall.
Use a pencil to mark 3 holes.

Remove the bracket. Using a 7/64" drill bit, drill 3 holes where marked.

Assemble the bracket to the cabinet bottom using a Phillips screwdriver and 3 provided
countersunk wood screws. Repeat for the other cabinet side.

Publicité

loading

Ce manuel est également adapté pour:

Chef vcqdd1 serieChef vcqsen130ss