Error codes
ERROR
MEANING
TYPE
E01
E02
E03
Sensor warning
E06
E07
Low Voltage
E08
Warning
Freezer com-
partment
E09
is not cold
enough
Fridge com-
partment
E10
is not cold
enough
Fridge
E11
partment
too cold
WHY
Power supply
to the device
has dropped
to below
170 V.
Likely to oc-
cur after long
term power
failure.
Likely to oc-
cur after:
- Long term
power failure.
- Hot food
has been left
in the fridge.
com-
is
Various
- 109 -
WHAT TO DO
Call Service for assistance as soon as possible
•
This is not a device failure, this error
helps to prevent damages to the com-
pressor.
•
The voltage needs to be increased back
to required levels
•
If this warning continues an authorised
technician needs to be contacted.
1.
Set the freezer temperature to a colder
value or set Super Freeze. This should
remove the error code once the required
temperature has been reached. Keep
doors closed to improve time taken to
reach the correct temperature.
2.
Remove any products which have
thawed/defrosted during this error. They
can be used within a short period of
time.
3.
Do not add any fresh produce to the
freezer compartment until the correct
temperature has been reached and the
error is no longer.
If this warning continues an authorised tech-
nician needs to be contacted.
1.
Set the fridge temperature to a colder
value or set Super Cool. This should re-
move the error code once the required
temperature has been reached. Keep
doors closed to improve time taken to
reach the correct temperature.
2.
Please empty the location at the front
area of air duct channel holes and avoid
putting food close to the sensor.
If this warning continues an authorised tech-
nician needs to be contacted.
1.
Check is Super Cool mode is activated
2.
Reduce the fridge compartment temper-
ature
3.
Check to see if vents are clear and not
clogged
If this warning continues an authorised tech-
nician needs to be contacted.