INOVU MBU32 Guide D'utilisation page 39

STAND INSTALLATION
5. Take out the monitor keeping the protective foam under, gently place it on a table or
on a flat surface.
6. Insert the stand's mounting plate at the rear of monitor. Lift the unlocking button to
make it enter the dedicated space. There will be a ''click'' sound once the mounting
plate is properly locked. Ensure that the stand is properly attached on the back of the
monitor before handling it. If you want to remove the stand, push the quick locking /
unlocking button located at the back of the mounting plate.
2. Insert the upper part
first, and press
down
Note: The stand can easily be detached from the monitor by pushing the fast locking /
unlocking button located on the back cover. Make sure that the monitor is lying on a
flat surface before removing it.
Fast locking / unlocking button
2. Lift the unlocking button to make it enter the
dedicated space. A ''click'' sound confirms that
the column stand's mounting plate is properly
locked to the back of monitor.