Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Using the appliance
1. Remove the kettle from the power base and open the lid by pressing the lid
button.
2. Place the kettle under a running tap and fill to above the minimum and below
the maximum mark.
3. Position the kettle on the power base.
4. Connect the appliances plug to the electrical supply and switch the appliance on.
5. Turn the kettles switch on. The light will indicate that the appliance is now on.
6. Once the appliance has boiled the kettle will automatically flick off. You can
cancel the boiling at any point by flipping the switch up.
7. Lift the kettle from the power base and pour the water from the kettle.
Cleaning and maintenance
• Disconnect the kettle before beginning cleaning.
• Do not immerse the power cord or base of the appliance in water or liquid for
any reason.
• Wipe the body of the kettle with a damp cloth or cleaner. Do not use abrasive
materials to clean the appliance.
• Always unplug the kettle when it is not in use.
• The kettle or any of it's components are not dishwasher safe.
Descaling the appliance
Periodically remove mineral deposits that collect in your kettle, this can be done by
using shop bought descaler or by following these basic instructions using white
wine vinegar. It is recommended you do this once a month.
1. Fill the kettle with 3 small cups of white wine vinegar, add water so that the
kettle is full between the MIN/MAX mark.
2. Once the kettle has boiled remove it from the heat. Pour out the cleaning
mixture. Boil the kettle again with normal water and repeat several times until
the odour of vinegar has disappeared.
You can also use a shop bought descaler to do this. Simply follow the instructions
on the packet and run the appliance as normal with the descaler solution in it.
After use, run clean water through the appliance three times.
Publicité
