DURAVIT Light and Mirror LM 7840 L/R Notice De Montage page 6

1
2
1
> Remove the mirror
fronts of the cabinet by
unlatching each hinge.
5
4x S8
> The plastic anchors
provided are for concrete
wall applications.
2
> Remove the mirror fronts.
6
4x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
3
110 V
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
7
> Plug the unit into outlet
and lift the unit up
and onto the mounting
bracket.
> Lay the bottom of the
mirror against the wall
and tighten the set screw
to secure the mirror in
place.
4
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
8
> Lay the bottom of the
mirror against the wall
and tighten the set screw
to secure the mirror in
place.
MAL_Light and Mirror_LM 7840 L/R/18.05.1
6