Publicité
Les langues disponibles
Les langues disponibles
Requirements
1.
Smart TV
2.
Network connection
3.
Mobile device based on Android or iOS platform
(Android OS 5.1 or higher; iOS 12 or higher
version)
4.
Smart Center app.(to be found on online
application stores based on Android and iOS
platforms)
5.
Router modem
6.
USB storage device in FAT32 format (required for
USB Recording feature, if available)
Notes:
For Android devices, Normal(mdpi), Large(hdpi) and Extra
Large(xhdpi) screen sizes are supported. Devices with 3" or
smaller screen sizes are not supported.
For iOS devices, all screen sizes are supported.
User interface of the Smart Center application is subject to
change according to version installed on your device.
Alexa Ready
Alexa is Amazon's cloud-based voice service available
on many voice controlled assistant devices. Your TV
is compatible with and ready to be utilised with Alexa
devices.
Works With Alexa
By means of the Works With Alexa feature you can
control the functions of your TV with Alexa devices. In
order to do this, the setup process should be comple-
ted. The setup can be carried out by using the Works
With Alexa option in the Settings>System>Voice
Assistant menu.
Setup process
The wizard will guide you through the setup process.
• On the first screen you will be informed about the
feature. Highlight Start and press OK to proceed.
• An authentication code will be created and displayed
on the screen. Use your computer or any other device
with internet access to go to the internet address
(URL) shown on the screen. You will be directed
to a page where you can sign in to your Amazon
account first, if you are not already signed in. Then
you will be directed to a page where you can enter
the authentication code you see on the TV and link
your TV to your Amazon account.
• If the linking process was successful you will be
asked to determine a name for your TV, called
'Friendly Name'(FN). A 'Friendly Name' is a name
that reminds you of your TV, such as 'Living Room
TV', 'Kitchen TV', 'Dining Room TV', etc. Choose an
easy-to-say name. You will say this name to tell Alexa
which TV to control. When you are done, highlight
OK and press OK.
• Examples about the use of the feature will be
displayed on the next screen. Press OK to finish
the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Example Commands
Here are some voice commands that you can use:
Command
Alexa, turn on 'FN'
Alexa, turn off 'FN'
Alexa, play 'FN'
Alexa, pause 'FN'
Alexa, resume 'FN'
Alexa, stop 'FN'
Alexa, fast forward on 'FN'
Alexa, rewind on 'FN'
Alexa, set the volume of
'FN' to 50
Alexa, turn the volume up
on 'FN'
Alexa, turn the volume
down on 'FN'
Alexa, mute 'FN'
Alexa, unmute 'FN'
Alexa, change the input to
"input_name" on 'FN'
Alexa, change channel to
"channel_number" on 'FN'
Alexa, change channel to
"channel_name" on 'FN'
Alexa, channel up on 'FN'
Alexa, channel down
on 'FN'
Alexa, next channel on
'FN'
FN is the abbreviation for 'Friendly Name'.
Amazon DART
Once the setup is complete, the DART (Dash
Replenishment Through Alexa) feature will be
integrated. This feature enables new batteries to be
ordered automatically when the remote control is low
English - 78 -
Function
Powers on the TV
Powers off the TV
Starts media playback
Pauses media playback
Resumes media playback
Stops media playback
Advances media in fast
forward mode
Rewinds media
Sets the volume to the
specified level
Increases volume by 10
units
Decreases volume by
10 units
Mutes sound
Unmutes sound
The TV switches to the
input source with the spec-
ified name (e.g. HDMI 1)
The TV switches to the
channel with the specified
number (e.g. channel 200)
The TV switches to the
channel with the specified
name
The TV switches to the
next higher channel, if any
available
The TV switches to the
next lower channel, if any
available
The TV switches to the
next channel on the
channel list
Publicité
