Geemarc iLoop Plus Mode D'emploi page 4

POWER SUPPLY / CONNECTING
2. POWER SUPPLY / CONNECTING
The unit needs 2pcs AAA size 1.2V
rechargeable NiMH batteries for correct
functioning. The batteries must be charged
for about 7 hours before use.
- Open the battery compartment door.
- Insert the batteries supplied with the unit,
making sure the polarity is according to
the diagram inside the battery
compartment.
- To charge the batteries connect the
supplied USB cable to the USB socket of
the unit and then onto a USB power
supply. The blue LED will light up.
- Continue charging until the LED switches
OFF.
- Disconnect the USB cable after the
charging is complete.
- Connect the audio plug of the unit to the
microphone/headphone socket of your
telephone. Your iLoop
use.
All manuals and user guides at all-guides.com
TM
3
+ is now ready for