Technical Specifications - Omnitronic UHF-400 Mode D'emploi

There are no servicable parts inside the device except for the batteries. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging the batteries".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

8. TECHNICAL SPECIFICATIONS

Wireless receiver:
System:
Frequency stability:
Frequencies:
Red:
Yellow:
Blue:
Gray:
S/N ratio:
Selectivity:
Dynamic range:
Modulation method:
AF response:
Audio output:
Power supply:
Power consumption:
Dimensions:
Weight:
Wireless microphone:
RF power output:
Coverage:
Power supply:
Current consumption:
Battery life:
Dimensions:
Weight:
Accessory:
OMNITRONIC UHF-400 BP Transmitter 796 MHz
OMNITRONIC UHF-400 BP Transmitter 804 MHz
OMNITRONIC UHF-400 BP Transmitter 805 MHz
OMNITRONIC UHF-400 BP Transmitter 808 MHz
Antenna holder for stand
OMNITRONIC Antenna cable TNC set 3 m
OMNITRONIC Antenna cable TNC set 5 m
OMNITRONIC Antenna cable TNC set 10 m
Please note: Every information is subject to change without prior notice. 17.01.2011 ©
Non-diversity
±0.002 %
UHF 796.700 MHz
UHF 804.750 MHz
UHF 805.100 MHz
UHF 808.975 MHz
>90 dB
>80 dB
>80 dB
FM
40 - 16,000 Hz
4x XLR (channel), 1x mono 6.3 mm jack (mixed out)
13-18 V DC, 500 mA
5 W
483 x 250 x 44 mm
1 kg
30 mW
80 m (with line-of-sight)
2 x 1.5 V Mignon batteries (type AA)
approx. 55 mA
approx. 8-10 hours
50 x 260 mm
400 g
No. 13055480
No. 13055485
No. 13055490
No. 13055495
No. 13063006
No. 13063042
No. 13063044
No. 13063046
16/30 00024203.DOC, Version 1.4