Page 2
INSTALLATION: C. If installing into a stud, drill 1/8” holes and do not use the Anchors. If installing into drywall, drill four 1/4” holes (5) as shown. Insert Anchors (6) into the holes and tap flush with wall. D. Install Mounting Bracket (3) by using the screws (7) over the Anchors (6). Mounting Brackets (3) must be horizontally leveled.
Page 3
BTB-S Series Serie BTB-S Série BTB-S 931-056 F. Place Mounting Posts (8 & 9) over Mounting Brackets (3). Secure by tightening Set Screws (12) onto Mounting Posts. Do Not Over Tighten! Español: F. Coloque los postes de montaje (8 y 9) sobre los soportes de montaje (3). Fije apretando los tornillos de fijación (12) a English Español Français...