Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Dear Customer,
Please read these operating instructions through carefully before connecting your device to the mains,
in order to avoid damage due to incorrect use. Please pay particular attention to the safety information.
STRUCTURE
1.
FRONT GUARD
2.
FAN BLADES
3.
GUARD MOUNTING NUT
4.
BACK GUARD
5.
MOTOR SHAFT
6.
MOTOR HOUSING
7.
OSCILLATING KNOB
8.
SWITCHES
9.
SWITCH COMPARTMENT
10. LOCK SPRAIN
11. UPPER PIPE
12. PIPE CONNECTOR
13. LOWER PIPE
14. CROSS BASE
ASSEMBLY
1. Secure lower pipe with Pipe support to the hub of Cross Base with screw provided.
2. Extend upper pipe, insert the pipe connector through upper pipe onto lower pipe and tighten.
3. Attach the motor with switch compartment onto the upper pipe. Ensure the switch compartment
is pushed fully onto the upper pipe and secured with the screw provided.
4. Loosen Guard Mounting Nut from the Motor Housing.
5. Position Back Guard firmly to Motor Housing and then fasten by turning Guard Mounting Nut
clockwise tightly.
6. Push the Blade along Motor Shaft and fasten firmly with the Blade.
7. Hang the Front Guard to Back Guard with the position fixer provided at the rim of Guard, and
then fix together with clips provided.
OSCILLATION CONTROL
1. Push the oscillation knob to oscillate.
2. Pull the oscillation knob to stop.
CAUTION
1. Read and retain these instructions for future use.
2. Improper installation may result in the risk of fire, electric shock, or serious injury to persons.
3. Power plug must be removed from power socket before cleaning, servicing, maintenance and
when moving from one location to another.
4. The fan should be placed on a flat and stable surface when operating to avoid overturning.
5. The fan should not be placed in a damp place or where humidity is high (such as in a
bathroom).
Publicité
