Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Installation Clearance Requirements
When installing the outdoor refrigerator under a counter, follow the recommended spacing
dimensions shown.
►
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
►
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Zephyr handle.
►
The cabinet should allow at least 24" for the width and 34" for the height to accommodate the
outdoor refrigerator.
►
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
►
Once you are ready to install the unit, you must adjust the feet to level the outdoor refrigerator.
►
This refrigerator can be fully built-in to cabinetry and does not require any additional clearances
besides what is referenced below.
►
The installation should allow the unit to be pulled forward for servicing, if necessary.
18
PRR24C01AS-OD Use, Care, and Installation Guide
P R E S R V ™
R E F R I G E R ATO R
O U T D O O R
Publicité
