Sound-X SMI-1450 Mode D'emploi page 9

All manuals and user guides at all-guides.com
Save Kit
Press the [save] button to enter the kit save menu. The
select [+] / [-] buttons or [dial] can be used to select a
user kit (21-30, loop) on the current kit setting. During
the kit selection, the user kit number will keep flashing.
Press the [save] button again; the current kit setting
will be saved to the selected kit. The unit will suspend
the kit menu and select this user kit as the current one,
if all the data has been saved successfully.
If saving has failed due to error, an 'Err' will appear on
the LED.
Note:
The unsaved kit setting will be lost after changing the
kit.
E09