Publicité
reduce your exposure, work in a well venti-
lated area, and work with approved safety equip-
ment, such as dust masks that are specially
designed to filter out microscopic particles.
To familiarize with the risks associated with a ma-
terial, consult with your employer, manufacturer/
supplier and government agencies regarding the
hazards of the materials and their recommendations
to protect yourself.
10. Don't Abuse Water Supply Hose. Don't
carry tool by supply hose or expose to traffic areas
where it can be crushed.
11. Always Secure Work Piece. Use clamps or
a vise to hold work. It's safer than using your hand
and it frees both hands to operate tool.
12. Don't Overreach. Keep proper footing and
balance at all times.
13. Disconnect Tools When Not In Use.
Always disconnect tool before servicing and when
changing accessories.
14. Remove Adjusting Keys And Wrenches.
Form a habit of checking to see that keys and
adjusting wrenches are removed from tool before
turning it on.
15. Maintain Tools With Care. Keep tools clean
at all times for best and safest performance. Follow
instructions for lubricating and changing acces-
sories. Keep handles dry, clean and free of oil or
grease. Inspect moving parts for alignment and bind-
ing as well as for breakage and improper mounting.
16. Avoid Accidental Starting. Do not carry a
"connected" tool, or make adjustments, or change
discs without making sure the tool is disconnected
from the air supply.
17. Use Only Recommended Accessories.
The use of any accessories other than what is
listed or recommended for this particular tool may
be hazardous.
18. Keep Hands Away From All Moving
Parts.
19. Use Side Handles. Supplied with tool for
control and safety.
20. Stay Alert. Watch what you are doing and use com-
mon sense. Do not operate tool when you are tired, or
under the influence of drugs, alcohol or medication.
To view the VSP-320 / VSP-340 Parts List and Schematics, visit us on the web at www.alpha-tools.com
4
CE Declaration of conformity
We declare under our sole responsibility
according to 2006/42/EC and EMC Directive
2004/108/EC relating machinery, that this
product is in conformity with the following
standards or standardization documents.
Product: Variable Speed Wet Polisher
Model: VSP-320 / VSP-340
Applied harmonized standards
EN60745-1:2009, EN60745-2-3:2007, EN60745-2-
3:2007/FprAC:2009, EN60745-2-3:2007/FprA1:200X,
EN62233:2008, EN55014-1:2006, EN61000-3-
2:2006, EN61000-3-3:1995+A1:2001+A2:2005, and
EN55014-2:1997+A1:2001
Alpha Professional Tools®
16 Park Dr Ste 9
Franklin, NJ 07416
Nao Takahashi
President
Publicité
