Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Headset with switch box
Item no. 1610096
Intended use
The product is used for freehand calls using a conventional telephone. It is possible to switch
between headset operation and telephone handset operation. Apart from the supply voltage
provided by the telephone, no separate supply voltage is required or permitted.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or fire. Read the instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery contents
• Headset
• Switch box
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The icon with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
All manuals and user guides at all-guides.com
Product overview
Connection and start-up procedure
The device is, as shown on the figure, connected between your telephone and your telephone
handset.
• Unplug your telephone's handset cable from your telephone. Follow the operating instructions
• Now plug one of the ends on the enclosed, approx. 60 cm long cable into your telephone's
• Connect the other plug on the cable to the socket labelled TEL (1) on the switch box (A).
• Connect the plug on the free end of your telephone handset cable with the telephone handset
• Then plug the headset plug (B) into the headset connection socket (3) on the switch box.
• For setting up and using the telephone headset, follow the instructions in the "Description
Adjusting the handset's pin assignment
• If necessary, open the cover (6) of the switch box (A) by sliding the semicircular cover
• You can now find the positions with the optimal voice quality by adjusting the two switches.
• Then slide the cover (6) back into position from top.
Description of operation
a) Making a call with the telephone handset
• Make sure that the "Handset / Headset" switch (4) is switched to "Handset". Use your
b) Making a call using the headset
• Put the headset (B) on so that the speaker is over your left ear.
• Lift the telephone handset and put it beside the telephone.
• For an outgoing call, dial the number as normal.
• Now push the "Handset / Headset" switch (4) on the switch box (A).
• To end a call, put up the telephone handset back on the telephone.
1 Telephone connection socket
2 Telephone handset connection socket
3 Headset connection socket
6
4 "Handset / Headset" switch
5 Mute button
5
6 Cover for selector switch used to set the cable
4
3
2
1
A Switch box
B Headset
B
A
for your telephone.
handset socket.
connection socket (2) on the switch box.
of operation".
Warning: It is possible that the sound quality will be inferior or that neither the
telephone handset nor the headset work despite being connected correctly. This
is because the handset cable pin assignment is different in telephones made by
different manufacturers. Your headset with switch box has 2 integrated slide
switches that enable optimal adaptation to the different pin assignments.
upwards with your thumb. There are 2 slide switches underneath:
- A switch at the top with positions 1 to 4.
- A second switch below with the positions "A" and "B".
First adjust the top switch only and test it after each adjustment. If needed, try again when
having adjusted the lower switch.
telephone as usual.
- The width of the headset can be adjusted. Just push the metal rail upwards slowly from its
bracket on the ear speaker.
- Position the microphone approximately 3 to 4 cm from your mouth by bending the
microphone boom.
- By pressing the "Handset / Headset" switch (4) on the switch box (A), you can also switch
between the receiver and the headset at any time during a call.
assignment
Publicité
