MSI PM8M2-V Serie Mode D'emploi page 14

Front Panel Audio Connector: JAUD1
The front panel audio connector allows you to connect to the
®
front panel audio and is compliant with Intel Front Panel I/O
Connectivity Design Guide.
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10
have to be jumpered in order to have signal output directed to the rear
audio ports. Otherwise, the Line-Out connector on the back panel will not function.
Clear CMOS Jumper: JBAT2
There is a CMOS RAM on board that has a power supply
from external battery to keep the system configuration data.
With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you
want to clear the system configuration, use the JBAT2 (Clear CMOS Jumper) to clear data.
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position.
Avoid clearing the CMOS while the system is on; it will damage the mainboard.
The mainboard provides one AGP slot, two 32-bit PCI bus slots and one CNR slot.
AGP (Accelerated Graphics Port) Slot
The AGP slot allows you to insert the AGP
graphics card. AGP is an interface specification
designed for the throughput demands of 3D
graphics. It introduces a 66MHz, 32-bit channel for the graphics controller to directly access main
memory. The slot supports 8x/4x AGP card.
PCI (Peripheral Component Interconnect) Slots
The PCI slots allow you to insert the expansion cards to meet
your needs. When adding or removing expansion cards,
make sure that you unplug the power supply first. Meanwhile,
10