DNT MusicFly Notice D'utilisation page 14

Getting started
lighter adaptor.
Since the radio stations differ regionally, the fre-
quency details are an example.
FM radio with auto-scan:
Select a frequency that is not being used for broadcasting
purposes.
Select a readiostation in the car radio p.e. 93,6 MHz
Remember the adjusted frequency and then start the scan-
ning.
When the scan stops p.e. 94,4 MHz, read the frequency in
the display of the car radio.
Turn the MusicFly on and adjust a frequency between the
two values (p.e. 94,0 MHz).
The minimum distance to the next radio station is
0.2 MHz.
Connect the MusicFly to the audio unit.
Turn on the audio unit and start playback.
Start the scan once again and fi nd the music of your audio
unit.
FM radio with manual tuning:
Select a frequency that is not being used for broadcasting pur-
poses. Turn the MusicFly on and fi nd the frequency adjusted
in the FM radio.
Connect the MusicFly to the audio unit.
Turn on the audio unit and start playback.
FM without display or with scale
Find free frequency range where noise is heared.
Connect the MusicFly to the audio unit.
Turn on the audio unit and start playback.
Find your music with UP-/Down button .
The exact procedure can differ and depends on
the FM radio.
- 14 -