3. PRIOR TO FIRST USE
Follow these instructions when using the vacuum cleaner for the first time: carefully remove
the vacuum cleaner and all accessories from the packaging and remove all packaging
material. Keep the packaging (plastic bags and cardboard) out of reach of children. After
unpacking the appliance, carefully check it for external damage that may have occurred
during transport. Place the vacuum cleaner on a sturdy, dry and flat surface.
4. ASSEMBLY
Make sure the plug of the vacuum cleaner is not inserted in a socket when (dis)assembling
accessories or parts.
Hose
Connecting the hose to the vacuum cleaner: insert the end of the hose in the hose connection
on the vacuum cleaner and turn it clockwise with a firm twist until you hear a click sound.
Disconnecting the hose from the vacuum cleaner: check that the plug is not in a power socket.
Turn the end of the hose counter-clockwise to disconnect it from the vacuum cleaner.
Telescopic tube
1.
Insert the handle of the hose in the telescopic tube.
2.
Attach the floor nozzle by sliding the tube firmly into the floor nozzle.
3.
Adjust the telescopic tube to the required length. Slide the button at the top of the tube
upwards and pull the lower section of the tube to make it longer. When you let go of the
sliding button, the tube will snap tight at the required length.
Accessories
For the benefit of the different cleaning objectives, attach the accessories to the tube or
handle of the hose by sliding them firmly on the tube or handle.
1.
Round nozzle: can be used to clean furniture, corners of the
sealing and blinds
2.
Upholstery nozzle: can be used to clean matrasses, seats of chairs
and pillows.
3.
Crevice nozzle: can be used to clean corners and tight areas which
cannot be reached with the combi-brush.
4.
Parquet brush: the parquet brush is provided with real natural hair.
The long soft hairs prevent scratches on the floor.
The parquet brush is suitable for parquet floors, laminate or wood
floors and all other smooth and hard floors.
5.
Accessory holder: the accessory holder can be attached to the
telescopic tube. The accessories can be attached to the holder so
that they are always within reach during use.
2 0
1
2
3
4