Work Smart 33320 Instructions De Montage

CHAISE DE TRAVAIL À DOUBLE FONCTION
7
9
11
12
13
10
9
4
3
1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les
quantités des pièces sont correctes.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la Roulette (2) s'enclencher. Insérer le Vérin
pneumatique (3) dans la Base (1) et glisser les Soufflets (4) sur le Vérin pneumatique (3).
ÉTAPE 2 Fixer le Mécanisme (5) au Coussin du siège (6) avec la flèche vers l'avant du siège avec quatre Vis du mécanisme (8). RESSERRER
COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (14).
ÉTAPE 3 Fixer le Support (11) au Support du dossier (12) avec Vis pour le dossier (9), RESSERRER COMPLÈTEMENT LE VIS AVEC LA CLÉ
ALLEN (14). Fixer le Support du dossier (12) a Mécanisme (5) avec Boulon avec des rondelles (10), RESSERRER COMPLÈTEMENT LE BOULON
AVEC DES RONDELLES (10) AVEC LA CLÉ ALLEN (14). Fixer la Couverture du support du dossier (13) au Support du dossier (12).
ÉTAPE 4 Placer le siège assemblé sur le Vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES
LES VIS ET BOULONS.
33320 / 33327 / 33340
INSTRUCTIONS DE MONTAGE
5
6
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5. Mécanisme . . . . . . . . . . . . . . . . . . 1
6. Coussin du siège . . . . . . . . . . . . . . 1
7. Coussin du dossier . . . . . . . . . . . . 1
8. Vis du mécanisme . . . . . . . . . . . . . 6
9. Vis pour le dossier . . . . . . . . . . . . . 1
10. Boulon avec des rondelles . . . . . 1
11. Support . . . . . . . . . . . . . . . . . . . . 1
12. Support du dossier . . . . . . . . . . . 1
13. Couvercle de support du dossier . 1
14. Clé Allen (non montré) . . . . . . . . . 2
3
2
1
QTÉ
LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
© Office Star Products juin 2018
33320 / 33327 / 33340
DUAL FUNCTION TASK CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.
To lower seat height sit on chair and pull lever (1) up.
• SEAT ANGLE ADJUSTMENT
To adjust seat angle, lift lever (2). Leave lever up for free float or
push lever (2 ) down to lock.
• BACKREST ANGLE ADJUSTMENT
To adjust back angle lift lever (3). Leave lever (3) up for free
float or push lever (3) down to lock at any angle.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.