Hathaway Hoops Dual NG2237BL Instructions D'assemblage page 10

THANK YOU! ASSEMBLY INSTRUCTIONS (CONT.)
FIG. 10
X1
X 4
X 2
X 2
X 1
1. Disengage Lean Bar (14) and slip end
through elastic straps and pocket at bottom
of Ball Return (34), then reattach to
Front Arms (11&12)
2. Slip Cross Brace (13) on inside of Ball
Return (34) and attach to Lean Bar (14)
on each end using hardware as shown
3. Wrap top Velcro straps on Ball Return (34)
around Lean Bar (14) on both side and secure
to other end of strap with Velcro
10