Publicité
Les langues disponibles
Les langues disponibles
02 TV Installation
One Invisible Connection Guide
TV
• The method for connecting the One Invisible Connection to the TV may differ depending on the model. For more
information, refer to Quick Setup Guide.
To connect the One Invisible Connection to the One Connect and your TV, follow these steps:
1. After the TV is completely set up and placed in its final position, connect the One Invisible Connection to the One
Connect and the TV as shown in Steps 1 to 4 above.
WARNING: Make sure that both connectors are fully and firmly connected. If either connecter is not connected
properly, there is a danger of severe electric shock.
2. Connect the One Connect AC power cord to the One Connect, and then connect the cord to a wall outlet as shown
in Step 5 above.
WARNING: Follow the directions exactly. Be sure to connect the power cord to the wall outlet as the last step.
Always disconnect the power cord from the wall outlet before disconnecting the One Invisible Connection from
the back of the TV or from the One Connect.
– See the illustrated Quick Setup Guide for more information.
3. Connect your peripherals (antenna, cable box, Blu-ray player, etc.) to the One Connect. See the Accessory Kit for
details.
English - 8
ONE CONNECT
4 inches
10 cm
Bending Cover
ONE CONNECT
5
ONE CONNECT
ONE CONNECT
4
Publicité
