Whirlpool RH3730 Serie Instructions D'installation Et Guide D'utilisation Et D'entretien page 6

Make electrical
connection
WARNING
Electrical Shock Hazard
Disconnect power before making
electrical connections.
Connect ground wire to green
ground screw in terminal box.
Failure to do so can result in
death or electrical shock.
white
green
ground
screw
14.
Direct wiring:
Connect the white and black wires
of the power supply cable to the
white and black leads in the hood
with twist-on connectors.
Connect the power supply ground
wire to the green ground screw
inside the terminal box.
Use caulking to seal wire opening.
Replace terminal box cover.
Using a U.L.-listed power
supply cord-connection kit
(U.S. only):
Follow Power Cord Kit instructions for
connecting wiring.
6
filter tab
15.
Pull firmly on filter tab to
remove filter/light lens from range
hood. Install 75 watt (maximum)
light bulb. Reinstall aluminum
filter.
16.
For non-vented
installations: Install non-vented
filter kit. (See Page 2.)
black
17.
Turn power on. Check
operation of fan and light. Make
sure damper operates freely.
ground
wire
To get the most efficient
use from your new range
hood, read the "Use and
Care Information" section.
Keep your Whirlpool
Installation Instructions and
Use and Care Guide close
to range hood for easy
reference.