Publicité
Les langues disponibles
Les langues disponibles
3. OPERATION
—Select the target temperature18℃-32℃(64℉-90℉) by pressing the "
corresponding value is displayed.
— Select the required fan speed by pressing the
function.
F1 Low
Run of the low noise.
F2 High
To achieved the temperature as fast as possible.
The most suitable temperature for the room during the summer varies from 24℃ to 27℃. You are
recommended, however, not to set a temperature much below the outdoor temperature. This will
cause unnecessary power consumption.
3.3 FAN MODE
When using the appliance in this mode, the air hose does not need to be attached.
To set this mode correctly:
—Press the "
" button a number of times until the "Fan" symbol appears.
—Select the required fan speed by pressing the
Two speeds are available: High (F2) / Low (F1).
3.4 DRY MODE
Before using the dry mode, the appliance should be prepared in the same way as for cool mode,
with the air exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
- Press the
varias veces hasta que button a number of times until the
"Dry"symbol light appears, the screen will appear "
- In this mode, fan speed is selected automatically by the appliance.
3.5 SETTING THE TIMER
This timer can be used to delay the appliance start up or shutdown, this avoids wasting
electricity by optimizing operating periods.
* Programming start-up
- Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
- Press the "
", button, the screen starts to fl ash, press the "
from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the "Timer" symbol lights.
- Press the "
" button again to cancel the Timer, and the "Timer" symbol disappear.
" / "
. button. Diff erent fan speed have diff erent
button.
".
" / "
" to adjust the set time
IGLU-23
UK
" button until the
UK
29
Publicité
