New One AR380BT Manuel De L'utilisateur page 9

LOCATION OF CONTROLS
1. PWR/ MOD button: To turn unit on/ off; To select function mode
2. SEL/ VOL knob: volume, select, enter knob
3. CLK (Clock) button: To set clock time
4. To answer / redial the phone; skip forward
5. LCD display
6. Built-in microphone
7. USB port
8. To hang up the call; skip backward
9. BND/ AMS/ TRANS: Band button (To select band: FM1, FM2, FM3); Automatic storing; Search a
track; transfer call
10. RES (RESET) button
11. MUTE button: To mute or restore sound
12. 1/ button: To select preset channel 1 in radio mode; To start or pause playback.
13. 2/ INT button: To select preset channel 2 in radio mode; To start/ cancel intro playback.
14. 3/ RPT button: To select preset channel 3 in radio mode; To repeat playback.
15. 4/ RDM button: To select preset channel 4 in radio mode; To start/ cancel random playback.
16. 5/ -10 button: To select preset channel 5 in radio mode; To skip backward 10 tracks (mp3 only)
17. 6/ +10 button: To select preset channel 6 in radio mode; To skip forward 10 tracks (mp3 only)
18. Micro SD card slot
19. AUX IN jack
AR-3838A IB NEWO 001 REV0.indd 9
GB - 3
BASIC OPERATIONS
Turning on/off the unit
Press PWR button to turn on the unit. Press and hold this button again to turn off the unit.
Selecting the mode
When the unit is on, press MOD button repeatedly to select different source mode:
TUNER USB CARD AUX BT
Note: USB, CARD mode can not be selected if no such source was plugged in the unit.
Current time display
Press CLK button to display the current time when unit is ON.
Adjust time:
1. When the unit is on, repeatedly press SEL button to select clock format setting mode.
2. Rotate volume knob anti-clockwise and clockwise to adjust 12 or 24 hour format.
3. Press and hold CLK button to enter into setting mode. The hour digits will flash.
4. Rotate SEL knob anti-clockwise and clockwise to adjust the hour value. Press this button again to
confirm the hour value.
5. The minute digits will flash, rotate SEL knob anti-clockwise and clockwise to adjust the minute value.
Noted:
- It will confirm your setting if no key is pressed within 5 seconds.
- In 12H clock format, be sure to observe the AM or PM indicator to set the hour correctly.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. To set
the unit to initial status, when the unit is on, press RES button on the front panel with a pointed object.
When some errors occur in display, you can also reset the unit, but it will erase the clock setting and
some memorized functions.
SOUND FEATURES
Volume adjusting:
To increase or decrease the sound level, rotate VOL knob clockwise or anti-clockwise.
Muting the sound
When the unit is ON, press MUTE to mute the sound. Press again to restore.
Using SEL/VOL knob to select sound feature
Repeatedly press SEL/VOL knob
To select the desired mode for sound setting in the following order: "BASS"
"BAL" (Balance) EQ OFF/ CLASS (CLASSICS)/ ROCK/ POP/ FLAT
LOC STEREO/ MONO CLOCK 12/ 24
After selecting the desired mode, you can adjust the level by rotating the volume knob.
"TRE" (Treble)
LOUD ON/ OFF
AREA EUR/ USA.
GB - 4
2017/4/10 15:51:34
DX/