Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
FIBERGLASS FAN
OPERATION INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARRANTY
CANARM Ltd. warrants every new product to be free of defects in material and workmanship, to the extent that, within a period of one
year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM's option, any unit or part thereof, returned freight
prepaid, and found to be defective.
This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of the unit at the user's
premises.Components repaired or replaced are warranted through the remainder of the original warranty period only.
This warranty applies to the original purchaser-user only; it is null and void in case of alteration, accident, abuse, neglect, and operation
not in accordance with instructions.
NOTICE:
No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.
GENERAL SAFETY
Rotating parts, (pulleys, shafts and belts) on fans should not be exposed. Where these components are not protected by ductwork, cabinets
or covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be opened with the fan
operating to avoid foreign objects being drawn into the system. On initial start-up, a careful inspection should be carried out to ensure no
foreign material is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Canarm Fiberglass Fan. Failure to
comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference.
INSTALLATION OR PRODUCT PROBLEMS? DO NOT RETURN TO STORE OF PURCHASE.
CONTACT CANARM SERVICE AT 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)
1-800-567-2513 (EN FRANÇAIS) MONDAY TO FRIDAY 8:00 - 5:00PM E.S.T.
Canarm Ltd. - Corporate Head Office
2157 Parkedale Avenue, PO Box 367
Brockville, Ontario Canada K6V 5V6
Tel: (613) 342-5424 Fax: (613) 342-8437
www.canarm.com
M0066_FIBERGLASS FAN_02_22_2023
Arthur Manufacturing Facility
#7686 Concession 16, RR 4
Arthur, Ontario Canada. N0G 1A0
Tel: (519) 848-3910. Fax: (519) 848-3948
agsales@canarm.ca
Page 1 of 10
Publicité
Manuels Connexes pour Canarm FGI18
Sommaire des Matières pour Canarm FGI18
- Page 1 WARRANTY CANARM Ltd. warrants every new product to be free of defects in material and workmanship, to the extent that, within a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option, any unit or part thereof, returned freight prepaid, and found to be defective.
- Page 2 Your fan should be installed into a wood frame (see Chart #1 for dimensions). CHART #1 Framing Dimensions (W x H) Model Model Model Model Wall Depth FGI18 FGI24 FGI36 FG48 24-3/4" x 24-3/4” 31" x 31" 43" x 43” 55" x 55”...
- Page 3 WARNING WARNING: BE SURE POWER IS OFF AT THE ELECTRICAL PANEL BEFORE WIRING. When bringing power to the fan, water-tight cable and connectors should be used. The cable will be brought to the motor through the slot provided in the top of the shutter and allowances in length of cable should be considered. Bring the cable down below the height of the motor then back up to the connector in the side of the motor.
- Page 4 Varying a single speed fan will cause the motor to fail. Fan labels should indicate whether or not fan is variable speed. If unsure contact a Canarm representative with the fan model number at our head office.
- Page 5 ACCESSORIES Canarm provides a full line of controls from simple on/off thermostats to sophisticated multiple staging controllers and PC based controllers. Winter covers are available for colder climates where the fan is shut down for the winter. Performance enhancing cones are available for 24"...
- Page 6 FIBERGLASS FAN 18” Direct Drive M0066_FIBERGLASS FAN_02_22_2023 Page 6 of 10...
- Page 7 FIBERGLASS FAN 24” Direct Drive M0066_FIBERGLASS FAN_02_22_2023 Page 7 of 10...
- Page 8 36” Direct Drive...
- Page 9 FIBERGLASS FAN FGI 36” Belt Drive M0066_FIBERGLASS FAN_02_22_2023 Page 9 of 10...
- Page 10 FIBERGLASS FAN FGI & FG Exploded View FRI50 ROTARY TENSIONER BELT DRIVE FG503 " 0 " 5 D " " 0 P9601 ROTARY BELT TENSR CAST AL. ASSY W/S P3030-50BT 49.75" GALV. BLADE, 3PDL,31DEG, TRIM " 1 " 6 " 0 "...
- Page 11 1 an pour le reste du ventilateur, de la date d'achat. Durant cette annee, CANARM optera de remplacer ou reparer le ventilateur, ou toute piece de ce ventilateur, si ce ventilateur est retourne frais de transport payes et qu'il est juge defectueux. Les pieces reparees ou remplacees seront garanties pour la periode restante de la garantie originale seulement.
- Page 12 Tous les ventilateurs sont testes en usine avant la livraison pour assurer leur bon fonctionnement. Ce ventilateur devra etre installe dans un cadrage en bois (voir tableau #1 pour les dimensions). TABLEAU # 1 Mod l FGI18 FGI24 FGI36 FG48 24-3/4"...
- Page 13 MISE EN GARDE ASSUREZ-VOUS QUE LE COURANT EST FERME AU DISJONCTEUR AVANT DE FAIRE LES CONNEXIONS. Lorsque vous apportez le courant au ventilateur, un cable et des connecteurs etanches devront etre utilises. Le cable sera achemine au moteur en passant en travers de la fente fournie au dessus du volet. Vous devez laisser un leger surplus de cable. Acheminez le cable vers le bas de toute la longueur du moteur puis revenez vers le haut jusqu'au connecteur situe sur le cote du moteur.
- Page 14 L'etiquette sur le moteur devrait indiquer si le moteur est a vitesse variable ou non. Si vous etes incertain, communique avec le service a la clientele chez Canarm, en nous indiquant le numero de modele du ventilateur MISE EN GARDE: LES VENTILATEURS A VITESSE VARIABLE DEVRAIENT ETRE A UN REGIME MINIMUM QUI PERMETTRAIT LES VOLETS D'OUVRIR A AU MOINS L"...
- Page 15 ACCESSORIES Canarm vous offre une ligne complete d'accessoires telles !es controles simples au controles multi stages complexes pouvant etre operes de votre PC. Des couverts hivernaux sont aussi disponibles pour !es endroits ou les ventilateurs sont en arret durant l'hiver. Des cones pour rehausser le rendement sont disponibles dans des grandeurs allants de 24"...
- Page 16 VENTILATEUR EN FIBRE DE VERRE 18” Direct Drive M0066_FIBERGLASS FAN_FR_02_22_2023 Page 6 de 10...
- Page 17 VENTILATEUR EN FIBRE DE VERRE 24” Direct Drive M0066_FIBERGLASS FAN_FR_02_22_2023 Page 7 de 10...
- Page 18 VENTILATEUR EN FIBRE DE VERRE 36” Direct Drive *7"! ;7*#*7" /<!*=" ++ !"# $#% & ''() ) * % % ++ $''" & ( * % % %, " %% % : $* & . /) ( 0)1 !)# / ) % % +...
- Page 19 VENTILATEUR EN FIBRE DE VERRE FGI 36” Belt Drive M0066_FIBERGLASS FAN_FR_02_22_2023 Page 9 de 10...
- Page 20 VENTILATEUR EN FIBRE DE VERRE FGI & FG Exploded View ;<.5;= .>?63<?>; >2. @;3/> ! " # $ % & # " (" )* %)+ , $ , ,$ + )! & & - " - "-! -! "! " + ) + + " - &-)) - %"- "" & 0 &-)) , "...