Elipson Stream S300 Xi Manuel D'utilisation page 22

EN
IV. USING THE STREAM S300 Xi
After connecting the streamer to your amplifier, plug in the power supply.
Depending on your system, you can either use the optical output on an
external DAC or connect the analogue output to an amplifier (line or AUX
input).
WI-FI CONNECTION :
In order to successfully connect your Elipson Stream S300 Xi to your home
network follow the detailed instructions in our Elipson Multiroom application.
Do not hesitate to refer to the tutorials on our website if you encounter any
difficulties during the process.
RESETTING PARAMETERS :
Press and hold the "RESET" button on the front of the unit until the "Power",
"LAN", "BT", "AUX", LEDs flash simultaneously. Once the restoration is complete,
the unit will automatically start the Wi-Fi network connection procedure.
22