Installation Instructions
Please Read the Manual Carefully Before Installa-
tion
Please note
Electrical connection
The oven is fitted with a plug and must only be
connected to a properly installed earthed socket.
The socket must only be installed and the
connecting cable must only be replaced by a
qualified electrician, and in accordance with the
appropriate regulations. If the plug is no longer
accessible following installation, an all pole
isolating
switch
must
be
present
on
the
installation side with a contact gap of at least 3
mm.
The fitted cabinet must not have a back wall
behind the appliance. Minimum installation
height: 85 cm. Do not cover ventilation slots and
suction holes.
Note: Do not trap or bend the power cable.
43
V.4