Publicité
ATTENTION WITH
ES
ATTENTION (A)
▶Setting the weekly timer is done by pressing the WEEK button (step
1) on the remote control. This timer lasts 7 days, once this time has
passed, the established settings will stop working.
PT
ATTENTION (B)
▶If a timer has been programmed with STEP 1 (WEEK) for today, you
must manually set the next timer for today, by doing STEP 2 (SET)
EN
and using the "+" button, otherwise the timer setting from STEP 1
will be overwritten.
ATTENTION (C)
FR
▶Start and stop times can only be entered in whole hours (minutes
cannot be specified).
9- Deleting the timer setting using the remote control:
▶Delete all timer settings:
• Press the WEEK button for three (3) seconds, until the display
shows the flashing UU.
• Pressing the C (Cancel) button and will clear all timer settings.
▶Delete all timer settings for a specific day:
• Press the WEEK button for three (3) seconds, until the display
shows the flashing UU.
• Press the SET button and the display will flash your ON/OFF
selection (timer on or off).
• Press the SET button again and the display will flash your
selection of 01/99 (one time or endless).
• Press the SET button again and the display will show flashing U1
(day 1).
• Using the + and/or - buttons, select the day for which you want to
remove the timer setting.
• Pressing the C (Cancel) button will clear all timer settings for the
day in question.
▶Delete a specific timer setting:
• Press the WEEK button for three (3) seconds, until the display
shows the flashing UU.
• Press the SET button and the display will flash your ON/OFF
selection (timer on or off).
• Press the SET button again and the display will flash your
selection of 01/99 (one time or endless).
• Press the SET button again and the display will show flashing U1
(day 1).
• Using the + and/or - buttons, select the day for which you want to
delete the timer setting.
Instruction manual
10- Checking the timer setting with the remote:
▶Press the WEEK button several times briefly. You will see the
▶This is repeated for the next timer setting. All 28 timer settings are
CLEANING AND MAINTENANCE
▶Asegúrese de que el aparato esté apagado y desenchufado de la
▶Con un paño suave y húmedo, con o sin una solución de jabón suave,
CAUTION: Allow product to cool completely before handling or
cleaning..
▶Do not allow water or other liquids to enter the interior of the
▶We also recommend periodic cleaning of this appliance with the
· CAUTION: DO NOT use strong detergents, chemical cleaners, or
solvents as they may damage the surface, finish of components, or
other materials.
• Pressing the C (Cancel) button will clear all timer settings for the
day in question.
following settings in sequence:
• Timer On or Timer Off
• Just once (01) or endlessly (99)
• U1-U7, days of the week
• Timer setting number of the day in question (1, 2, 3, or 4)
• Thermostat set temperature
• Start time (in hours)
• Stop time (in hours)
displayed, also the timer settings that have not been completed. The
default temperature of the timer is 45°C.
fuente de alimentación antes de limpiar.
limpie cuidadosamente la superficie exterior del producto.
product, as this could create a fire and/or electrical hazard.
vacuum nozzle over the guards to remove any dust or dirt that may
have accumulated on the unit..
Ref. 07181
Publicité
