Hedge-Trimmer; Introduction To The Operating Instructions Gb; Technical Data - Mogatec HS 6070 Pro Mode D'emploi

Hedge-Trimmer

Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.

Technical Data

Model
Rated Voltage
Nominal Frequency
Rated Output
Cutting movements
Cutting length
Cutting Thickness
Weight
Noise Pressure Level L
Vibration
We reserve the right to make changes to the technical specifications.
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
GB | Operating Instruction
V~
Hz
W
min
-1
mm
mm
kg
dB(A) EN 60745
pA
m/s² EN 60745
HS 6070 Pro
(MHE 7070 Pro)
230
50
700
2.400
650
29
4,2
85 K=3,0 dB(A)
< 2,5 K=1,5 m/s²
GB-2