Napoleon BHD4 Instructions D'installation

BATTERY BACK-UP INSTALLATION INSTRUCTIONS
ALLOW SAFETY SCREEN TO COOL COMPLETELY BEFORE ANY MAINTENANCE AS IT WILL REMAIN HOT
ENSURE THE UNIT IS COMPLETELY COOL BEFORE STARTING INSTALLATION.
TO AVOID DANGER OF SUFFOCATION KEEP THE PACKAGING BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE IN CRIBS, BED, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.
NOTE: In the event of a power failure your appliance can be operated using the battery back-up supplied.
A. Remove the safety screen by lifting it up and out of th bottom retainer, then pivot down and out of the top retainer.
B. Remove the panel cover using the two fi nger holes, then remove the control panel cover by lifting it up and off of
the four shoulder screws, this will allow you to easily access the battery housing.
C. Remove your battery housing to install the batteries, this will be located in the control compartment, as shown.
D. Install the four "AA" batteries, ensure the positive and negative ends correspond with those identifi ed on the
battery housing.
E. Place the battery housing back into position or let it rest on the hearth, for the duration of the power failure.
NOTE: Once the power has been restored remove the batteries from the battery housing. The system will drain
the batteries if they are left in the battery housing.
PANEL COVER
CONTROL
PANEL COVER
TO VIEW A VIDEO OF THIS INSTALLATION VISIT OUR WEBSITE AT: www.napoleonfi replaces.com/productsupport/bhd4
NOTE: FOR MORE DETAILED INSTRUCTIONS REFER TO YOUR INSTALLATION MANUAL.
All manuals and user guides at all-guides.com
BHD4
WARNING
!
DO NOT TOUCH SAFETY SCREEN UNTIL COOLED.
AFTER APPLIANCE IS NO LONGER OPERATING.
KNOT BEFORE THROWING AWAY.
!
BATTERY
HOUSING
05.20.14