Publicité
Les langues disponibles
Les langues disponibles
5. Care
Use a damp cloth for cleaning.
Never use chemicals or scouring agents for cleaning.
The luminaire must be cleaned of dirt at regular intervals.
When using the luminaire outdoors, also pay attention to soiling, e.g. by leaves, and remove this
regularly.
Protect the lamp from frost.
6. Ttechnical data
Article
1x Ni-Mh battery 1,2 V 300
501242
7. Malfunctions
The luminaire does not light up or only lights up briefly:
Light switched on?
Battery weak or defective. Replace the battery
An external light source (e.g. street lamp) prevents the lamp from switching on. Therefore, move
the lamp to a darker place. 8.
8. Replacing the battery
To replace the battery, unscrew the head with the LED panel and lay it down with the LED side
facing upwards.
Now unscrew the two Phillips screws.
After removing the screws, you can pull the plastic part out of the head. Do not damage the internal
wiring in the process.
Now the battery compartment is accessible. When replacing the battery, make sure that the polarity
is correct.
The installation is done in reverse order.
9. Disposal
The symbol of the crossed-out dustbin means that you have a legal obligation to dispose of this
equipment separately from unsorted municipal waste. Disposal in the residual waste bin or the yellow
bin is prohibited. If the products contain batteries or rechargeable batteries that are not permanently
installed, these must be discharged, removed and disposed of separately as batteries before disposal.
H. Vollmer GmbH ǀ Allmendring 29 ǀ 75203 Königsbach-Stein ǀ www.HEITRONIC.de
Power supply
LED with colour change
mAh, type AAA
Protection
Light source
type
IP44
not changeable
Protection
class
III
4 / 8
12/21
Publicité
