Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
GROUNDED INSTRUCTION
This heater is for use on 240 V. The cord has a plug as shown in Fig. A. No adapter is
available for this blade configuration, and none should be used. The type outlet is a
240 V grounding outlet. When properly installed, it provides a ground connection
through the cord to the heater to protect the operator from electric shock.
Fig. A
SPECIFICATIONS
Garage Heater
Models: QPH-4800
Volt: 240 V
Watts: 4800 W
Frequency: 60 Hz
Amps: 20 A
BTU/h: 16382
The heater, which has a thermal cut-off protection, is intended for garage or workshop.
If the thermal cut-off protection trips, switch off the power and unplug the cord from
the outlet. The unit should reset automatically after 10 minutes. If the thermal cut-off
protection trips again, determine the reason for overheating.
INSTALLATION
1. Read all IMPORTANT INSTRUCTION before installation this heater.
2. Keep the unit at least 10" (25.4 cm) away from any adjacent surfaces. This
minimum distance must be maintained.
3. Set the Thermostat dial to its counter-clockwise position.
4.
Plug the heater into the properly grounded outlet only and make sure the cord is
fully inserted into the outlet.
- 3 -
Publicité
