essentiel b MS-E-500-D Notice D'utilisation page 18

Repeat/Shuffle
When playing an audio CD or MP3 files, you can select a repeat option. Press the PLAY button on the
N G
remote control to repeat a track (REP 1), a second time to repeat the entire CD (REP ALL), and a third time
for random playback (RANDOM). A fourth time to disable repeat - or press the STOP
remote control. The display shows the repeat mode.
IR
Programming a playlist
STANDBY
You can create a custom playlist of up to 20 CD tracks or 99 tracks for other media. In STOP mode,
press the PROG (9) button; the screen displays MEM P01. Select the desired track number using the
and buttons. Then press PROG again to confirm. The screen displays MEM P02, then select
another track number. Repeat as often as necessary (20 tracks maximum). Then press the
to start playback. Do this in the order you have defined. Use the MEM/FOLD±10 button to browse /
M EN U /
through your programming.
PA IR/
IN FO /
The screen displays the information about the track being played back.
SC A N /
To stop the playlist, press STOP
SEL EC T
To erase the playlist, press the STOP button and eject the CD. The programming is erased.
listening to FM radio
Connect the antenna cable provided to the back of the micro hi-fi system, and fully unfold it.
1.
Turn on the micro hi-fi system and select the RADIO source by repeatedly pressing the SOURCE
2.
R
button on the remote control or the unit.
Performing a full scan of the FM band
When the radio is turned on, press the SCAN button to fully scan the FM band. The first thirty
1.
stations found are stored.
/10+ /10
To interrupt the search, press the SCAN button again.
2.
Scanning of the FM band stops when a radio station is found.
3.
You can then turn the MEM/FOLD±10 knob to refine your search, as described in the next section.
4.
Manually searching for a radio station
Use the and buttons or turn the TUNING knob until you get optimal reception frequency.
1.
With each movement of the knob or each press on one of the two buttons, the frequency decreases/
increases by 0.05 MHz.
If reception is poor, adjust the FM antenna or change the frequency.
2.
34
V.1.0
All manuals and user guides at all-guides.com
SOURCE
1
INFO/MENU EQ PROG/PRESET
2
MIC.VOL
3
MUTE
4
SELECT
5
PLAY MODE SCAN
(18) button on the
6
.
FU N C T IO N
7
8
Manually storing radio stations
9
10
11
12
VOLUME
When the radio is turned on, select the FM station of your choice.
1.
13
14
Press and hold the PROG button. Preset 01 appears on the screen. Use the
15 2.
16
BASS
to select the desired memory number. Press the SELECT button to confirm the programming of the
17
18
FM station. Repeat as often as necessary.
The programmed stations remain stored even after switching off the device.
•
Programming a new station under an already assigned number automatically erases the previously
•
saved station.
You can program up to 30 radio stations.
•
button
Listening to a saved frequency
Use the MEM/FOLD±10 button on the remote control to select the desired stored frequency.
and buttons
35
V.1.0