Publicité
Les langues disponibles
Les langues disponibles
ACTIVATE CAMERA
After the SIM card is activated and the battery is
inserted, a red LED will turn on, and you will hear
the voice prompt "APN settings has been impor-
ted succesfully, network connection succeeded. "
A blue LED will first flash for a few seconds and
then stay solid for a few seconds. When the light is
solid, the camera has been successfully connected
to the mobile network.
If you hear "Network connection failed", make sure
your free trial subscription is active at
my.luda.farm. Also make sure the 3G or 4G
signal is good, then remove the battery and insert
it back again.
6
SET UP CAMERA ON FARMCAM 2.0 APP
Download and install the FarmCam 2.0 app.
1
Open the app.
2
Click the
button
on the top right corner
to add the camera.
Scan the QR code on the side of the camera
3
and follow the steps to complete the setup.
7
Publicité
