Conrad 75 16 59 Notice D'emploi page 39

All manuals and user guides at all-guides.com
b) Remote control
Button „VOL-"
For setting the volume.
„MENU" button
Call the menu or leave the menu.
Buttons „0" to „9"
Numeric keys.
Button „- / - -"
There are 250 channels available. Where the desired channel has only 1 digit the
selection can be made directly via the buttons „0" to „9". If the desired channel has
two digits, press the button „-/- -" and then enter the desired channel number using
the buttons „0" to „9". If the desired channel has three digits, press the button „-/- -"
twice, and then enter the desired channel number using the buttons „0" to „9".
„POWER" button
Using this button switches the monitor on, or to the
standby-mode, so long as there is a proper operating
voltage.
Button „PRO up"
These keys are use for channel selection, as well as
for navigation within menus.
„MUTE" button
This button is used to mute the monitor. Press this but-
ton again or the buttons „VOL-" or „VOL+" in order to
cancel the muting.
or „VOL+"
or „Pro down"
31