Publicité
Les langues disponibles
Les langues disponibles
10
Inner glass
Attach inner glass onto light fixture and
install nut removed in step 9 to hold the
glass.
1. Check blue wire from fan to make sure it is connected to hot wire from house.
2. Check for loose or disconnected wires in fan switch housing.
3. Check for loose or disconnected wires in light kit.
4. Check for faulty light bulbs.
CAUTION: Make sure main power is turned off before entering switch housing.
© 2014 Monte Carlo Fan Company
11
Outer glass
Attach outer glass onto light fixture
and install the finial removed in step
9, hand tighten securely. Do not over
tight.
TROUBLESHOOTING
4
11/10/2014
Publicité
