Zyxel G-162 Mode D'emploi page 15

8 Troubleshooting
PROBLEM
Windows does not
auto-detect the
ZyXEL G-162.
or C ertifica tions . F or more informa tion a bout your devices Decla ra tion of C onformity (DO C ) plea s e refer to www. z yxel. com
ENGLISH
Make sure the ZyXEL G-162 is inserted into the computer
CardBus slot properly and then restart your computer. Check
the LEDs on the ZyXEL G-162.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyXEL G-
162 and install the driver.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the ZyXEL G-162 under
Network Adapter. (Steps may vary depending on the version
of Windows).
Install the ZyXEL G-162 in another computer. If the error
persists, you may have a hardware problem. In this case, you
should contact your local vendor.
CORRECTIVE ACTION
13